Setting The Display Of The Position Key (Tool Position) - GRAPHTEC FCX4000 SERIES User Manual

Setting the display of the position key (TOOL POSITION)
Set whether to display the tool position when the [SLOW] key is pressed.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed
2
Press the POSITION [ ] key (ADV.).
ADVANCE screen (1/3) is displayed.
3
Press the POSITION ( ) key.
ADVANCE screen (2/3) is displayed.
4
Press the [4] key (TOOL POSITION).
TOOL POSITION setting screen is displayed.
5
Press the [1] key (ENABLED), or the[2] key (DISABLED).
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ADVANCE screen (2/3).
7
Press the [PAUSE/MENU] key.
It will return to default screen.
Supplement
It will return to ADVANCE screen (2/3)
without changing the settings when you
press the ESC key (CANCEL).
10-8