GRAPHTEC FCX4000 SERIES User Manual page 103

Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the [2] key (ARMS).
ARMS SETTING screen (1/5) is displayed.
3
Press the POSITION ( ) key twice.
ARMS SETTING screen (3/5) is displayed
4
Press the [2] key (AXIS ORIGIN OFFSET).
AXIS ORIGIN OFFSET screen is displayed.
5
Press the [1] key (X).
X AXIS setting screen is displayed.
6
Press the POSITION (
the setting value.
) keys and increase or decrease
5-21
Supplement
It will return to ARMS SETTING screen (3/5)
without changing the settings when you
press the [ESC] key (CANCEL).
Supplement
•
Digits of settings can be changed by
pressing the [SLOW] key.
•
Setting rage is up to the upper limit (±) of
the cutting area.