GRAPHTEC FCX4000 SERIES User Manual page 248

6
Press the [1] key (SAMPLE CUT).
SAMPLE CUT screen is displayed.
7
Confirm that the tool is set.
8
Confirm that moving parts of tool and media are safely
operated.
9
Press any of [1] to [4] keys to perform the sample cut.
Plotting of the sample cut starts.
10
When the printing is finished, it will return to READY status.
Supplement
The contents of the sample cut screen
depend on the command setting.
Do not place your hand around the moving
areas. The tool carriage will start moving, so
there is a chance of injury.
Supplement
It will return to TEST menu screen without
plotting when you press the [ESC] key
(CANCEL).
14-24
CAUTION