Adjust Manually - GRAPHTEC FCX4000 SERIES User Manual

5
Confirm the setting and press the [ENTER] key (SET).
Adjustment by scanning the registration mark is completed, and it will
return to default screen.
Adjust Manually
This section describes the operation to adjust with registration mark
scan by moving to registration mark manually after setting the ARMS
mode and POINTS.
Operation
1
Press the [2] key (SCAN START POSITION) in the ARMS
SETTING screen (1/5).
SCAN START POSITION screen is displayed.
2
Press the [4] key (AUTO).
AUTO SETING screen is displayed.
3
Press the [2] key (OFF).
SCAN START POSITION screen is displayed.
Supplement
•
It will return to default screen without
changing the settings when you press the
[ESC] key (CANCEL).
•
Distance input screen for point 3 is displayed
if it is set to 3POINTS or more, so repeat steps
4 and 5 to set.
Supplement
See "Adjust Automatically" if you are moving
automatically to registration mark for
scanning.
Supplement
Press the [2] key (ARMS) in the MENU screen
if it is not ARMS SETTING screen.
5-46