Setting The Tool Up Height - GRAPHTEC FCX4000 SERIES User Manual

8.4

Setting the Tool Up Height

The TOOL UP HEIGHT is the height of the tool position when the tool is raised.
Set to "HIGHT POSITION" if the media is thick. Usually, set to the "NORMAL POSITION".
Supplement
This setting will be saved even if the power is turned off.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the [1] key (TOOL).
TOOLS SETTING screen (1/4) is displayed.
3
Press the POSITION ( ) key twice.
TOOLS SETTING screen (3/4) is displayed.
4
Press the [4] key (TOOL UP HEIGHT).
TOOL UP HEIGHT setting screen is displayed.
8-8