GRAPHTEC FCX4000 SERIES User Manual page 44

<Setting the Start and End Positions>
This setting determines by what margin each end of the creasing line falls short of the corresponding end of the
actual data line.
Setting range: 0 to 9.99 (mm)
CP-001
Actual data
10
Press the [4] key (START).
START setting screen is displayed.
11
Increase or decrease the setting value using the POSITION
( ) keys and press the [ESC] key.
CREASE setting screen is displayed.
12
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to CONDITION screen (3/4).
13
Press the [COND/TEST] key.
It will return to default screen.
PM-CT-002
Media
Specified value
Actual data
Media
Specified value
2-22
Supplement
For short-line data such as circle command
data, setting a large value for the START
parameter (Start position) may result in
cutting/plotting not being performed.