Setting The Acceleration - GRAPHTEC FCX4000 SERIES User Manual

Setting the Acceleration

Set the acceleration of the tool that is used in each of the tool condition numbers.
Setting range : 1 to 10
Operation
1
Press the [COND/TEST] key in the default screen.
CONDITION screen (1/4) is displayed.
2
Press the POSITION ( ) key.
CONDITION screen (2/4) is displayed.
3
Press the [1] key (ACCELERATION).
ACCEL setting screen is displayed.
4
Press the POSITION (
number (CONDITION No.).
5
Press the POSITION (
the setting value.
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to CONDITION screen (2/4).
7
Press the [COND/TEST] key.
It will return to default screen.
) keys and select the condition
) keys and increase or decrease
2-25
Supplement
You can set between 1 and 10.
When the value is reduced, the acceleration
is lower and the quality is better.