Output With A Bar Code - GRAPHTEC FCX4000 SERIES User Manual

12.2

Output with a Bar Code

The information related to the output file is preliminarily bar-coded using the Cutting Master4 and Graphtec Pro
Studio, etc. and it can be printed with the design and the registration marks.
When cutting with the cutting plotter, the bar code is scanned and the cut data (xpf) that has been saved to a USB
memory that matches the bar code is detected.
Operation
1
Insert the USB memory that saved the dedicated data to the
cutting plotter.
2
Press the [PAUSE/MENU] key.
MENU screen is displayed.
3
Press the ( ) key (MEM.).
OFF-LINE OPERATION screen is displayed.
4
Press the [2] key (BARCODE CUT).
The following message is displayed.
Supplement
•
If the USB memory is not inserted, the
following screen is displayed.
•
When the ROTATION is enabled, the
following screen is displayed.
•
When the REVERSE CUTTING is enabled,
the following screen is displayed.
12-4