Setting Shape (Pattern) Of Registration Mark - GRAPHTEC FCX4000 SERIES User Manual

7
Press the [2] key (NUMBER OF POINTS).
NUMBER OF POINTS screen is displayed
8
Press the [1] key (2POINTS), the [2] key (3POINTS) or the [3]
key (4POINTS).
This will select the number of registration marks and return you to the
REGISTRATION MARK MODE setting screen.
9
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS SETTING screen (2/5).
10
Press the [PAUSE/MENU] key.
It will return to default screen.
Setting Shape (Pattern) of Registration Mark
Preset the shape (pattern) of registration marks to scan.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed
2
Press the [2] key (ARMS).
ARMS SETTING screen (1/5) is displayed.
3
Press the POSITION ( ) key.
ARMS SETTING screen (2/5) is displayed.
Supplement
It will return to ARMS SETTING screen (2/5)
without changing the settings when you
press the [ESC] key (CANCEL).
5-13