Sense The Registration Mark For Adjustment On The Media And Enter The Value - GRAPHTEC FCX4000 SERIES User Manual

16
Press the [4] key (Y).
SENSOR OFFSET ADJ. Y screen is displayed.
17
Press the [ESC] key key and increase or decrease the setting
value. Set the Y value measured in step 12.
18
Confirm the setting and press the [ESC] key (PREVIOUS).
SENSOR OFFSET is selected and it will return to SENSOR OFFSET
ADJ. screen.
19
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS SETTING screen (3/5).
20
Press the [PAUSE/MENU] key.
It will return to the default screen.
Sense the Registration Mark for Adjustment on the Media and Enter the Value
Method to enter the adjustment value, which is the difference between the scanned registration mark on the
media and the cutting position, is described here.
Supplement
Plot the registration mark before going to following steps if there is no registration mark printed on the media. See "Adjust
After Plotting the Adjustment Registration Mark" to plot registration marks.
Operation
1
Load the media with registration mark for adjustment in the
plotter.
2
Press the [PAUSE/MENU] key.
MENU screen is displayed.
Supplement
Setting range is -2.0 mm to +2.0 mm.
Supplement
It will return to ARMS SETTING screen (3/5)
without changing the settings when you
press the [ESC] key (CANCEL).
Supplement
See "Loading Media" for loading the media.
5-26