(See "Setting Registration Mark Size".)
(See "Setting Mark Distance".)
(See "Setting Distance Adjustment Between the Registration
Marks".)
(See "Setting Offset Between the Registration Mark and Cutting
Origin Points".)
(See "Adjusting the Sensor Level".)
(See "Manually Adjusting the Sensor Level (Threshold Value)".)
4
Press the [PAUSE/MENU] key.
MENU screen is displayed.
5
Press the [2] key (ARMS).
ARMS SETTING screen (1/5) is displayed.
Steps are different from here depending if it is going to move
to registration mark automatically to scan the registration
mark, or if it is going to move manually to scan. See next
section.
(See "Adjust Automatically".)
(See "Adjust Manually".)
5-41