GRAPHTEC FCX4000 SERIES User Manual page 92

1 axis adjustment (2POINT sensing)
Supplement
•
Multiple registration marks (Alignment registration mark) is not available. (See the "Multiple registration marks [Alignment
registration mark])
•
The printable range on the figure below is for when the Mark Distance is not specified.
The cutting area changes depending on the Mark Distance that is set.
It will detect the tilt of the printing from 2 registration marks, and cut is performed matching the tilt of the print.
MARK TYPE MIRROR 1
2 axes adjustment (3POINTS sensing)
Supplement
•
Distance between the registration marks can be adjusted.
•
Multiple registration marks (Alignment registration mark) is available. (See the "Multiple registration marks [Alignment
registration mark)
•
The printable range on the figure below is for when the Mark Distance is not specified.
The cutting area changes depending on the Mark Distance that is set.
It will sense the vertical and horizontal tilts from 3 registration marks, and cut is performed matching the tilt of the print.
Precision of print and cut position will be higher than the 1 axis adjustment.
MARK TYPE MIRROR 1
MARK TYPE 1
MARK TYPE MIRROR 2
Cutout area
Printable area
MARK TYPE 1
Cutout area
Printable area
MARK TYPE 2
Cutout area
MARK TYPE 2
MARK TYPE MIRROR 2
Cutout area
5-10
MARK TYPE 3
MARK TYPE 4
MARK TYPE 3
MARK TYPE 4