Structure of Cutter Plunger
PHP33-CB09N-HS/
PHP33-CB15N-HS
Hole
CAUTION
< PHP33-CB09N-HS/PHP33-CB15N-HS >
•
Please fully insert the cutter blade straight into the plunger cap.
If the cutter blade cannot be inserted straight, please insert the cutter blade after pressing the insertion port of the cutter
blade several times.
Insertion port of the cutter blade
If not installed correctly, it may result in damage to the cutter blade or the plotter itself.
< PHP35-CB09-HS/PHP35-CB15-HS >
•
Please fully insert the cutter blade straight into the chuck.
If the cutter blade cannot be inserted straight, please insert the cutter blade after pressing the insertion port of the cutter
blade several times.
Insertion port of the cutter blade
If not installed correctly, it may result in damage to the cutter blade or the cutting plotter itself.
Blade-length adjustment knob
Plunger
Cutter blade
φ0.9 mm / φ1.5 mm
Plunger-cap
(Blue) / (Red)
PHP35-CB09-HS/
PHP35-CB15-HS
Blade-length adjustment knob
(Blue) / (Red)
Plunger
Cutter blade
φ0.9 mm / φ1.5 mm
Chuck
Plunger-cap
Hole
2-3