GRAPHTEC FCX4000 SERIES User Manual page 222

6
Press the [1] key (ON) or the [2] key (OFF).
7
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to BLADE WEAR ALARM SETUP
screen.
8
Press the [2] key (SET BLADE GROUP).
SET BLADE GROUP setting screen is displayed.
9
Press the POSITION (
No. (CONDITION NO.).
10
Press the POSITION (
setting value.
11
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to BLADE WEAR ALARM SETUP
screen.
12
Press the [3] key (ALARM DISTANCE).
ALARM DISTANCE setting screen is displayed.
) keys and select the tool condition
) key and increase or decrease the
13-8
Supplement
Setting range is 1 to 8.
Supplement
Setting range is 0 to 8.
When set to 0, the alarm will not belong to
any group.