GRAPHTEC FCX4000 SERIES User Manual page 106

4
Press the [2] key (ARMS).
ARMS SETTING screen (1/5) is displayed.
5
Press the POSITION ( ) key twice.
ARMS SETTING screen (3/5) is displayed.
6
Press the [3] key (SENSOR OFFSET ADJ.).
SENSOR OFFSET ADJ. screen is displayed.
7
Press the [1] key (TEST PATTERN).
Following message is displayed.
8
Press the POSITION (
carriage to the position to plot the registration mark (position
nothing is printed).
9
Press the [ENTER] key.
A registration mark for adjustment is created, and then it will return to
SENSOR OFFSET ADJ. screen.
) keys and move the tool
5-24
Supplement
It will return to ARMS SETTING screen (3/5)
without changing the settings when you
press the [ESC] key (CANCEL).
Supplement
It will return to SENSOR OFFSET ADJ.
screen without plotting by pressing the [ESC]
key (CANCEL).