7
Confirm the setting and press the [ESC] key (PREVIOUS).
Offset value will be selected, and it will return to AXIS ORIGIN OFFSET
mode screen.
8
Press the [2] key (Y).
Y AXIS setting screen is displayed.
9
Press the POSITION (
the setting value.
10
Confirm the setting and press the [ESC] key (PREVIOUS).
Offset value will be selected, and it will return to AXIS ORIGIN OFFSET
mode screen.
11
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS SETTING screen (3/5).
12
Press the [PAUSE/MENU] key.
It will return to default screen.
) keys and increase or decrease
5-22
Supplement
•
Digits of settings can be changed by
pressing the [SLOW] key.
•
Setting rage is up to the upper limit (±) of
the cutting area.
Supplement
It will return to ARMS SETTING screen
without changing the settings when you
press the [ESC] key (CANCEL).