2
Turn the plunger cap in the counter-clockwise direction to
remove it from the plunger
3
Remove the blade from inside the plunger cap.
4
Remove a new blade from its pack. Insert the new blade into
the hole provided in the plunger cap.
5
With the blade inserted into the plunger cap, screw on the
plunger from above.
6
Fix the plunger cap by turning it clockwise.
CAUTION
< PHP33-CB09N-HS/PHP33-CB15N-HS >
•
Please fully insert the cutter blade straight into the plunger cap.
If the cutter blade cannot be inserted straight, please insert the cutter blade after pressing the insertion port of the cutter
blade several times.
Insertion port of the cutter blade
If not installed correctly, it may result in damage to the cutter blade or the plotter itself.
< PHP35-CB09-HS/PHP35-CB15-HS >
•
Please fully insert the cutter blade straight into the chuck.
If the cutter blade cannot be inserted straight, please insert the cutter blade after pressing the insertion port of the cutter
blade several times.
Insertion port of the cutter blade
If not installed correctly, it may result in damage to the cutter blade or the plotter itself.
13-4