GRAPHTEC FCX4000 SERIES User Manual page 54

6
As instructed, turn the blade length adjustment knob to the
left to fully retract the blade.
Blade
7
Set the cutter pen in Tool Holder.
8
Press the [ENTER] key.
You can calculate the height by moving the tool up and down.
TO ACHIEVE THE TARFET LENGTH screen is displayed.
9
Press the [1] key (BLADE LENGTH TARGET).
BLADE LENGTH TARGET screen (TARGET) is displayed.
10
Press the POSITION (
the setting value.
11
Confirm the settings and press the [ENTER] key.
The Blade Length Target will be selected, and you will return to the TO
ACHIEVE THE TARGET LENGTH screen.
) keys and increase or decrease
2-32
Supplement
See "Structure of Cutter Plunger" for blade
length adjustment knob.
Supplement
See "Attaching a Tool" for instructions on
setting.