Other Error Messages - GRAPHTEC FCX4000 SERIES User Manual

Other Error Messages

Error
LCD Display
Displayed
E01001 to
E01005
E01006
E01007
E01008
E01009
E01010
E01011
E01012
E01013
E01014
E01015
E01017
Cause
The plotter is defective.
The plotter is defective.
The plotter is defective.
The plotter is defective.
The plotter is defective.
The plotter is defective.
The plotter is defective.
The plotter is defective.
The plotter is defective.
The plotter is defective.
The plotter is defective.
The plotter is defective.
Load on the motor was too large.
14-11
Solution
Contact your sales representative or
nearest Graphtec dealer.
Contact your sales representative or
nearest Graphtec dealer.
Contact your sales representative or
nearest Graphtec dealer.
Contact your sales representative or
nearest Graphtec dealer.
Contact your sales representative or
nearest Graphtec dealer.
Contact your sales representative or
nearest Graphtec dealer.
Contact your sales representative or
nearest Graphtec dealer.
Contact your sales representative or
nearest Graphtec dealer.
Contact your sales representative or
nearest Graphtec dealer.
Contact your sales representative or
nearest Graphtec dealer.
Contact your sales representative or
nearest Graphtec dealer.
Move the object disturbing the operation,
and turn on the plotter after turning it off
once.