2
While pushing up the tool holder, push the tool into the holder
until the flange of tool completely touches the upper part of
the holder.
3
Make sure that the tool bracket is engaged on the tool's
flange, and then tighten the screw.
Removing the tool
When removing the tool, turn the tool holder screw counterclockwise to remove the tool.
Tool
Bracket to hold tool
Flange
Tool holder
Bracket to hold tool
Flange
Tool holder screw
2-6
CAUTION
When pushing the tool holder with your
fingers, the blade tip may be protruding.
Take care not to cut your fingers.