Setting The Origin Point - GRAPHTEC FCX4000 SERIES User Manual

3.3

Setting the Origin Point

Point where the cutting starts is called origin point. The origin point can be set at any location.
Original origin point
How to set the current position to the new origin
1
Press the POSITION (
new origin point.
2
Press the [ORIGIN] key. The beeper sounds to indicate that
the new origin has been set.
New origin point is set, and "NEW ORIGIN POINT IS SET !" is displayed
for few seconds in the screen.
It will return to the default screen.
How to store the current position as a new origin
1
Press the POSITION (
new origin point.
2
When the [ORIGIN] key is held down, the beeper sounds.
When you remove your finger from the [ORIGIN] key, the
beeper sounds again.
The following screen is displayed.
New origin point
) keys to move the tool to the
) keys to move the tool to the
3-7