GRAPHTEC FCX4000 Series Setup Manual

FCX4000
CUTTING PLOTTER
Preface
Thank you for choosing this product. Carefully keep this manual in a handy location for quick reference as necessity prior
to use to ensure safe and correct use and also to thoroughly understand the functions and operate them effectively.
Prior to use
Be sure to read the attached "TO ENSURE SAFE AND CORRECT USE" prior to use. Otherwise, it may cause an
unexpected accident or fire.
Notes on this Manual
(1) No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any
means, without the prior written permission of Graphtec Corporation.
(2) The product specifications and other information in this manual are subject to change without notice.
(3) While every effort has been made to provide complete and accurate information, please contact your sales
representative or nearest Graphtec vendor if you find any unclear or erroneous information or wish to make other
comments or suggestions.
(4) Notwithstanding the stipulations in the preceding paragraph, Graphtec Corporation assumes no liability for damages
resulting from either the use of the information contained herein or the use of the product.
Registered Trademarks
All names of companies, brands, logotypes, and products appearing in this manual are the trademarks or registered
trademarks of their respective companies.
Copyright
This User's Manual is copyrighted by Graphtec Corporation.
Roles of each manual
•
Setup Manual (this manual) .......Read it to understand method for connecting this Cutting Plotter with the PC, installing
•
User's Manual (PDF data) ..........Read it to thoroughly understand the functions.
SERIES
method for driver software, and to prepare for the operation.
SETUP MANUAL
MANUAL NO. FCX4000-UM-8M2
622659111