GRAPHTEC FCX4000 SERIES User Manual page 55

12
Press the [2] key (CHECK).
You can calculate the height by moving the tool up and down.
The amount and direction to turn the adjustment knob is displayed.
13
Turn the blade length adjustment knob and adjust the cutter
blade length.
Current blade length is displayed by pressing the [2] key
(CHECK), so adjust the blade length until it matches the
thickness of the media.
14
Press the [ESC] key (END).
Adjustment is completed and it will return to CONDITION screen.
15
Press the [COND/TEST] key.
It will return to default screen.
Supplement
"T" is the target value of the blade length,
and "H" is the current blade height (amount) .
Turning the blade length adjustment knob
displays the number of turns and direction.
Supplement
Depending on the loaded media, the blade
might sink in to the media, making accurate
measurement impossible.
2-33