Page Length - Setting The Length Of The Page With Roll Media - GRAPHTEC FC5100A-75 User Manual

PAGE LENGTH - Setting the Length of the Page with Roll
Media
Ad v an ce d F un c ti on s a nd S et t in g s: PA G E L E N G T H - S e tt i ng th e L en g th o f t he P ag e w it h R ol l M e di a
This function is used to specify the length of individual pages when using roll
media.
CAUTION: For optimum precision, specify the PAGE LENGTH to 2m or less.
CAUTION: When PAGE LENGTH is set to over 2m, be especially careful to load the media
properly to prevent the it from coming loose from the rollers during cutting or
plotting.
CAUTION: When using roll media or roll paper, be sure to pull out the entire amount of
media required for the operation before you begin cutting or plotting, unless the
AUTO PRE FEED function is enabled.
• Press the MENU key to select MENU mode.
• Press the NEXT key two times.
• Press the F2 key to select AREA PARAMETERS.
Setting a negative
expansion limit.
Setting a positive
expansion limit.
INTERFACE>.
AREA PARAMETERS>.
FUNCTION 1>.
FUNCTION 2>.
77