GRAPHTEC FCX4000 SERIES User Manual page 161

11
Press the POSITION (
setting value.
12
Confirm the setting value and press the [ESC] key
(PREVIOUS).
TOOL OFFSET ADJ setting screen is displayed.
13
Press [4] key (Y=+0.0 mm).
TOOL OFFSET ADJ (Y) setting screen is displayed.
14
Press the POSITION (
setting value.
15
Confirm the setting value and press the [ESC] key
(PREVIOUS).
TOOL OFFSET ADJ setting screen is displayed.
16
Repeat Steps 6 through 15 until there is no displacement
between the two tools.
17
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to TOOLS SETTING screen (1/4).
18
Press the [PAUSE/MENU] key.
It will return to default screen.
) key and increase or decrease the
) key and increase or decrease the
7-25
Supplement
Setting range is -2.0 mm to +2.0 mm.
Supplement
Setting range is -2.0 mm to +2.0 mm.
Supplement
It will return to TOOLS SETTING screen (1/4)
without changing the settings when you
press the [ESC] key (CANCEL).