GRAPHTEC FCX4000 SERIES User Manual page 134

6
Press the [1] key (MARK SCAN MODE).
MARK SCAN MODE setting screen is displayed.
7
Press the [1] key (MARK SCAN MODE).
MARK SCAN MODE setting screen is displayed.
8
Press the [3] key (AXIS ALIGNMENT).
MARK SCAN MODE will be selected and it will return to MARK SCAN
MODE setting screen.
9
Press the [2] key (NUMBER OF POINTS).
NUMBER OF POINTS setting screen is displayed.
10
Press the [1] key (2POINTS), the [2] key (3POINTS), or the [3]
key (4POINTS).
NUMBER OF POINTS will be selected and it will return to MARK SCAN
MODE setting screen.
11
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS SETTING screen (2/5).
12
Press the POSITION ( ) key.
ARMS SETTING screen (1/5) is displayed.
Supplement
It will return to MARK SCAN MODE setting
screen without changing the setting when
you press the [ESC] key (CANCEL).
Supplement
It will return to MARK SCAN MODE setting
screen without changing the setting when
you press the [ESC] key (CANCEL).
6-4