GRAPHTEC FCX4000 SERIES User Manual page 244

6
Confirm that the tool is set.
7
Confirm that moving parts of tool and media are safely
operated.
8
Press the [1] key (DONE).
Plotting of the CUTTING PRO starts.
9
After the completion of print, the TEST menu screen (1/2) is
displayed.
10
Press the [PAUSE/MENU] key.
It will return to default screen.
Do not place your hand around the moving
areas. The tool carriage will start moving, so
there is a chance of injury.
Supplement
It will return to TEST menu screen without
printing when you press the [ESC] key
(CANCEL SELF TEST).
14-20
CAUTION