GRAPHTEC FCX4000 SERIES User Manual page 152

11
Press the POSITION (
the setting value.
12
Confirm the setting and press the [ESC] key (PREVIOUS).
CUT LENGTH will be set and it will return to CUT LINE CONDITION
screen.
13
Press the [4] key (UP).
UP L setting screen is displayed.
14
Press the POSITION (
the setting value.
15
Confirm the setting and press the [ESC] key (PREVIOUS).
UP LENGTH will be set and it will return to CUT LINE CONDITION
screen.
16
Press the POSITION ( ) key (UP MODE).
UP MODE setting screen is displayed.
) keys and increase or decrease
) keys and increase or decrease
7-16
Supplement
•
Setting range is 0.01 mm to 100.00 mm.
•
Digits of settings can be changed by
pressing the [SLOW] key.
Supplement
•
Setting range is 0.01 mm to 10.00 mm.
•
Digits of settings can be changed by
pressing the [SLOW] key.
Supplement
Setting range is 1 to 40 or "UP".