9.3
I/F (LAN)
Set the network interface (LAN).
Supplement
When you change the settings of the network, the cutting plotter is reset.
To connect through a network (LAN), it is necessary to set the following items.
• Set the DHCP
• Set the IP address
• Enter the subnet mask
• Enter the gateway
• Display the MAC addres
Set the DHCP
DHCP settings depend on the configuration of network equipment and the customer's environment. For details,
please see the equipment manual, or consult the network administrator.
The default setting of DHCP is OFF.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the [ ] key (I/F).
INTERFACE screen (1/3) is displayed.
9-5