GRAPHTEC FCX4000 Series Setup Manual
  1. Manuals
  2. Brands
  3. GRAPHTEC Manuals
  4. Plotter
  5. FCX4000 SERIES
  6. Setup manual
GRAPHTEC FCX4000 Series Setup Manual

GRAPHTEC FCX4000 Series Setup Manual

Cutting plotter
Hide thumbs Also See for FCX4000 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
FCX4000
CUTTING PLOTTER
Preface
Thank you for choosing this product. Carefully keep this manual in a handy location for quick reference as necessity prior
to use to ensure safe and correct use and also to thoroughly understand the functions and operate them effectively.
Prior to use
Be sure to read the attached "TO ENSURE SAFE AND CORRECT USE" prior to use. Otherwise, it may cause an
Notes on this Manual
(1) No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any
means, without the prior written permission of Graphtec Corporation.
(3) While every effort has been made to provide complete and accurate information, please contact your sales
comments or suggestions.
(4) Notwithstanding the stipulations in the preceding paragraph, Graphtec Corporation assumes no liability for damages
resulting from either the use of the information contained herein or the use of the product.
Registered Trademarks
All names of companies, brands, logotypes, and products appearing in this manual are the trademarks or registered
trademarks of their respective companies.
Copyright
This User's Manual is copyrighted by Graphtec Corporation.
Roles of each manual
Setup Manual (this manual) .......Read it to understand displaying method for the User's Manual, method for connecting
User's Manual (PDF data) ..........Read it to thoroughly understand the functions.
indicates reference page in this Setup Manual.
P.00
SERIES
this Cutting Plotter with the PC, installing method for driver software, and to prepare for
the operation.
www.delinit.by
SETUP MANUAL
MANUAL NO. FCX4000-UM-8M1
622659010

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FCX4000 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for GRAPHTEC FCX4000 Series

Summary of Contents for GRAPHTEC FCX4000 Series

  • Page 1 (3) While every effort has been made to provide complete and accurate information, please contact your sales comments or suggestions. (4) Notwithstanding the stipulations in the preceding paragraph, Graphtec Corporation assumes no liability for damages resulting from either the use of the information contained herein or the use of the product.

  • Page 2: Before Starting The Setup

    Install the software as necessity. Software enabling cutting data to be created through simple commands. P.11 B. Setup the Graphtec Pro Studio Create designs and edit characters/shapes using this software. Plug-in driver that enables simple cutting through direct operation from within P.11...

  • Page 3: Attaching A Tool

    Setting up the Plotter main unit 1 Attaching a Tool Attach a tool to the plotter. Attaching a Tool When attaching the tool in the tool holder, please note the following. moving. It is explained here using cutter plunger as an example. Loosen the tool holder screw.

  • Page 4: Loading The Media

    Bracket to hold tool Flange Tool holder screw Removing the tool When removing the tool, turn the tool holder screw counterclockwise to remove the tool. 2 Loading the Media Supplement securely attached to the writing panel before cutting. sheet or something similar on the panel before cutting. Replacement of damaged writing panel is available for a fee. tape on all four sides.

  • Page 5: About The Initial Setup Screen

    3 About the Initial Setup screen display language and length unit. You can also change the settings from the menu after a setup. Once the machine is powered on (" | " side) a message will be displayed after the version will be displayed. Here, DISPLAY LANGUAGE setting screen is displayed.
  • Page 6 To make 1 cut with set value To make 3 cuts with set value and ±1 of set value Make test cutting for one piece while Tool conditions are Make test cutting for three pieces while Tool conditions being set. are being set.

  • Page 7: Installing The Software

    Windows 10 (32-bit/64-bit), Windows 8.1 (32-bit/64-bit), Windows 8 (32-bit/64-bit ), Windows 7 (32-bit/64-bit ) Macintosh Mac OS X 10.11 to 10.7/ macOS 10.13 to 10.12 (Graphtec Studio also supports Mac OSX 10.6.) When Using Macintosh Macintosh operating environments are supported by the following software.
  • Page 8 Proceed with installation according to your operating environment. A. Install FCX4000 Software: Install the [Plotter Driver]. B. Setup Graphtec Pro Studio: "Software enabling cutting data to be created through simple commands. Create designs and edit characters/shapes using this software." C. Setup Cutting Master 4: Plug-in driver that enables simple cutting through direct operation from within Adobe Illustrator and CorelDRAW.
  • Page 9 Installing the [Plotter Driver] Connect the network cable after installing it. (See Click on [Install FCX4000 Software]. After a while, the "Setup" screen of "Graphtec FCX4000 for more information on how to connect the network cable.) driver" will be displayed.
  • Page 10 Connecting the USB Cable (3) Connect the USB cable. First, make sure that Windows 10 has been launched successfully. Next, ensure that the plotter is turned off and then 1 . Connect to your computer. connect the USB cable supplied with the plotter to your computer.
  • Page 11 B. Setup Graphtec Pro Studio C. Set Up Cutting Master 4 D. Install User's Manual Follow the below procedures to install the User's Manual (pdf format). PDF browsing software must be installed on your computer in order to read the manual.
  • Page 12 Setup in a Macintosh operating environment A. Set Up Cutting Master 4 B. Setup Graphtec Studio www.delinit.by 622659010...

Table of Contents