Cleaning The Cutter Pen - GRAPHTEC FCX4000 SERIES User Manual

13.3

Cleaning the Cutter Pen

Letting leftover media and paper dust build up on blades can dull them and cause them to deteriorate. Be sure to
clean the cutter pen regularly and remove build up.
CAUTION
To avoid bodily injury, handle cutter blades with care.
Operation
1
Clean off paper dust and media build up from the blade. After
cleaning it, return it to its proper place.
Spin the plunger cap, remove it, and then clean the blade
entrance area.
PHP33-CB09N-HS/
PHP33-CB15N-HS
2
Attach the plunger cap after the cleaning is finished.
Plunger
Cutter blade
Plunger cap
Cleaning
PHP35-CB09-HS/
PHP35-CB15-HS
Plunger
Cutter blade
Chuck
Cleaning
13-5