Setting The Tool - GRAPHTEC FCX4000 SERIES User Manual

Setting the Tool

Set the tool type and offset to be used.
Set their values in accordance with tool condition of each label material and each tool type. (Refer to "Tool
condition for each tool" described above).
Operation
1
Press the [COND/TEST] key in the default screen.
CONDITION screen (1/4) is displayed.
2
Press the [2] key (TOOL).
TOOL setting screen is displayed.
3
Press the POSITION (
4
Press the [3] key (OFFSET).
OFFSET setting screen is displayed.
5
Press the POSITION (
the setting value.
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to CONDITION screen (1/4).
7
Press the [COND/TEST] key.
It will return to default screen.
) keys, and set the tool.
) keys and increase or decrease
2-19
Supplement
•
What is Offset
It will adjust the difference between the
tip of the blade in the plunger and the
center of the plunger. There are standard
adjustment values for each cutter blades.
Fine adjustment will be made to that
standard values here. (Adjustment will be
made with standard value as 0.)
•
Setting range is from -5 to +5
In the case of other setting range, it is +1
to +99.
Supplement
Press the [ESC] key (Return) to return to the
CONDITION screen without changing any
settings.