GRAPHTEC FCX4000 SERIES User Manual page 180

6
Press the POSITION (
7
Confirm the setting and press the [ESC] key (PREVIOUS).
Network (LAN) setting screen is displayed.
8
Press the [3] key (SUBNET MASK).
SUBNET MASK setting screen is displayed.
9
Press the POSITION (
10
Confirm the setting and press the [ESC] key (PREVIOUS).
Network (LAN) setting screen is displayed.
11
Press the [4] key (GATEWAY).
GATEWAY setting screen is displayed.
12
Press the POSITION (
) keys and set the IP address.
) keys and set the subnet mask.
) keys and set the gateway.
9-8
Supplement
By pressing the [SLOW] key, you can change
the digit of the setting.
Supplement
By pressing the [SLOW] key, you can change
the digit of the setting.
Supplement
By pressing the [SLOW] key, you can change
the digit of the setting.