GRAPHTEC FCX4000 SERIES User Manual page 223

13
Press the POSITION (
(GROUP NO.).
14
Press the POSITION (
setting value.
15
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to BLADE WEAR ALARM SETUP
screen.
16
Press the [4] key (CLEAR B. WEAR VALUE).
CLEAR B. WEAR VALUE setting screen is displayed.
17
Press the POSITION (
(GROUP NO.).
18
Confirm the setting and press the [ENTER] key (SET).
CLEAR screen is displayed.
19
Press the [1] key (Yes, CLEAR).
Blade wear value will be cleared and it will return to CLEAR B. WEAR
VALUE setting screen.
) keys and select the group No.
) key and increase or decrease the
) keys and select the group No.
13-9
Supplement
Setting range is 1 to 8..
Supplement
Setting range is 500 m to 5000 m (100 m
step)
Supplement
It will return to CLEAR B. WEAR VALUE
setting screen without clearing the blade
wear value when you press the [2] key
(CANCEL).