Starting Your First Measurement Session - Agilent Technologies Cary 8454 Operator's Manual

5 Using your UV-Visible Spectroscopy System

Starting Your First Measurement Session

Starting Your First Measurement Session

1 Make sure that your spectrophotometer has been installed correctly.
2 Switch on your PC, monitor and printer.
3 Log on to your PC operating system.
4 Switch on your spectrophotometer.
5 Start your measurement session by selecting Instrument 1 online from the
6 The first task is to measure a reference. Typically the cell containing the
68
For details of installation see your Agilent Cary 8454 UV-Visible
Spectroscopy System Installation Guide.
Confirm that your Agilent BootP Service is running using the Control
Panel's Administrative Tools Services dialog, or make sure that your
network administrator has integrated your spectrophotometer into your
local network.
A running BootP service will now assign the configured IP address to your
spectrophotometer. In the standard installation, the Agilent BootP Service
performs this task.
menu.
Your Instrument Panel shows you the current state of the
spectrophotometer and the Blank button is enabled.
solvent used with your samples is put in the measurement position and a
Agilent Cary 8454 UV-Visible Spectroscopy System Operator's Manual