Table of Contents
Advertisement
DHCP Server Configuration
DHCP Server Configuration
Use this page to configure DHCP server services.
DHCP Server Configuration
DHCP Server
DHCP Server Configuration
Apply
Excluded Address
36 - RocketLinx ES7506 User Guide: 2000529 Rev. E
You can select to Enable or Disable the DHCP Server function. The RocketLinx ES7506
assigns a new IP address to link partners.
After selecting to enable the DHCP Server function, type in the Network IP address for
the DHCP server IP pool, Subnet Mask, Default Gateway address, and Lease Time for
client.
Click Apply to apply the settings.
Note: You must Save the settings (Page 104), if you want to maintain these settings if the
RocketLinx ES7506 is powered off.
You can type a specific address into the IP Address field for the DHCP server reserved IP
address.
The IP address that is listed in the Excluded Address List Table is not assigned to the
network device. Add or remove an IP address from the Excluded Address List by
clicking Add or Remove.
Description
DHCP Server Configuration
Advertisement
Table of Contents
