Dhcp Server Configuration - Comtrol RocketLinx ES7506 User Manual

Industrial managed poe switch 4 - fast ethernet poe ports 2 - fast ethernet uplink ports
Hide thumbs Also See for RocketLinx ES7506:
Table of Contents

Advertisement

DHCP Server Configuration

Use this page to configure DHCP server services.
DHCP Server Configuration Page
DHCP Server
DHCP Server Configuration
Network
Subnet Mask
Default Gateway
Lease Time
Apply
Excluded Address
IP Address
RocketLinx ES7506 User Guide: 2000529 Rev. F
You can select to Enable or Disable the DHCP Server function. The ES7506
assigns a new IP address to link partners.
Enter the IPv4 address for the DHCP server.
Enter the subnet mask for the DHCP server.
Enter the IP gateway address for the DHCP server.
Enter the Lease Time in seconds for the client.
Click Apply to apply the settings.
Note: You must Save the settings
settings if the ES7506 is powered off.
You can type a specific address into the IP Address field for the DHCP server
reserved IP address.
The IP address that is listed in the Excluded Address List Table is not assigned
to the network device. Add or remove an IP address from the Excluded Address
List by clicking Add or Remove.
Configuration Using the Web Interface
(Page
93), if you want to maintain these
DHCP Server Configuration - 49

Advertisement

Table of Contents
loading

Table of Contents