Configuration Using the Web Interface
Port Configuration
The Port Configuration group allows you to enable/disable port state, or configure port auto-negotiation,
speed, duplex, flow control, port aggregation settings (port trunking), and rate limit control. It also allows you
to view port status and aggregation information. The following pages are included in this group:
•
Port Control
•
Port Status
on Page 72
•
Rate Control
on Page 73
•
Port Trunking
on Page 74
Optionally, you can use the CLI for configuration, see
Port Control
Port Control page allows you to enable/disable port state, or configure the port auto-negotiation, speed,
duplex, and flow control.
Select the port you want to configure and make changes to the port. The following table provides information
about the different port control options.
70 - Port Configuration
Port Configuration (CLI)
ES8508F and ES8508F-XT:
Ports 7 and 8 support 100 Full.
on Page 152.
RocketLinx ES8508 Series User Guide: 2000575 Rev. A