Table of Contents
Advertisement
Configuration Using the Web Interface
Port Configuration
The Port Configuration group allows you to enable/disable port state, or configure port auto-negotiation,
speed, duplex, flow control, port aggregation settings (port trunking), and rate limit control. It also allows you
to view port status and aggregation information. The following pages are included in this group:
•
Port Control
•
Port Status
on Page 68
•
Rate Control
on Page 70
•
Port Trunking
on Page 71
Optionally, you can use the CLI for configuration, see
Port Control
The Port Control page allows you to enable/disable port state, or configure the port auto-negotiation, speed,
duplex, and flow control.
Select the port you want to configure and make changes to the port. The following table provides information
about the different port control options.
Note: If both ends are not at the same speed, they cannot link with each other. If both ends are not in the same
duplex mode, they are connected by half-duplex mode.
66 - Port Configuration
Port Configuration (CLI)
RocketLinx ES8509-XT User Guide: 2000557 Rev. D
on Page 149.
Advertisement
Table of Contents
