Modbus - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .
2.3.12

MODBUS.

MODBUS
Configure the ModBUS server.
This parameter shows the table to configure the ModBus server.
MODBUS
MODBUSSVRTCP
MODBUSSVRRS
MODSVRID
MODBRATE
MODBUSSVRTCP
Activate the ModBUS sever on TCP.
Possible values: Yes / No.
Default value: No.
Associated variable: (V.)MPG.MODBUSSVRTCP
Parameter included in the MODBUS table.
Activate the ModBUS sever on TCP.
MODBUSSVRRS
Activate the ModBUS sever on RS485.
Possible values: Yes / No.
Default value: No.
Associated variable: (V.)MPG.MODBUSSVRRS
Parameter included in the MODBUS table.
Activate the ModBUS sever on RS485.
MODSVRID
Identifier of the ModBUS sever on RS485.
Possible values: From 1 to 255.
Default value: 1.
Associated variable: (V.)MPG.MODSVRID
Parameter included in the MODBUS table.
Identifier of the ModBUS sever on RS485.
MODBRATE
Communication speed of the ModBUS sever on RS485.
Possible values: 19200 Bd / 38400 Bd / 57600 Bd / 115200 Bd.
Default value: 19200 Bd.
Associated variable: (V.)MPG.MODBRATE
Parameter included in the MODBUS table.
Communication speed of the ModBUS sever on RS485.
Activate the ModBUS sever on TCP.
Activate the ModBUS sever on RS485.
Identifier of the ModBUS sever on RS485.
Communication speed of the ModBUS sever on RS485.
2.
CNC 8060
CNC 8065
(R : 1709)
EF
·83·