Machine Parameters For Hmi (Interface) - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .
2.11

Machine parameters for HMI (Interface).

These parameters are used to define the communication environment (interface) between
the operator and the CNC. To validate the changes made to these parameters, the CNC must
be reset.
2.11.1 Main window dimensions and resolution.
WINDOW
Main window dimensions and resolution.
This parameter shows the data to configure the main window. The table has the following
machine parameters.
WINDOW
POSX
POSY
RESOLUTION
WIDTH
HEIGHT
POSX
X coordinate of the top left corner.
Default value: 0.
Parameter included in the WINDOW table.
Consult the machine parameter of HMI POSY.
POSY
Y coordinate of the top left corner.
Default value: 0.
Parameter included in the WINDOW table.
These parameters define the X and Y coordinate to position the upper left corner of the
interface. The interface can be moved by clicking with the mouse on the icon showing the
program status of the active channel. Double click on this icon and the interface is positioned
in the upper left corner (POSX=0 POSY=0).
RESOLUTION
Screen resolution.
Possible values: CUSTOM / 10" / 15" / 19" / 21" LANDSCAPE / 21" PORTRAIT.
Default value: 10".
Parameter included in the WINDOW table.
Screen resolution. The CUSTOM option enables the width (WIDTH parameter) and the
height (HEIGHT parameter) of the window to be customized. The predefined sizes are set
to the following resolutions.
RESOLUTION.
(value)
CUSTOM
10"
15"
X coordinate of the top left corner.
Y coordinate of the top left corner.
Window resolution.
Width of the window.
Height of the window.
Interface size (pixels).
This option enables the width (WIDTH parameter) and the height
(HEIGHT parameter) of the screen to be customized.
800 × 600.
1024 × 768.
2.
CNC 8060
CNC 8065
(R : 1709)
EF
·305·