2.10.2
2.
CNC 8060
CNC 8065
(R
: 1709)
EF
·300·
Magazine data.
STORAGE
Parameters related to magazine.
This parameter shows or hides the magazine data. Each table shows the following machine
parameters to configure it.
MAGAZINE n
SIZE
Size of the tool magazine (number of pockets).
RANDOM
Random magazine.
SIZE
Size of the magazine (number of pockets).
Possible values: From 0 to 1000.
Default value: 20.
Associated variable: (V.)TM.MZSIZE[mz]
Parameter included in the MAGAZINE // STORAGE table.
This parameter indicates the capacity of the magazine without including the ground tools.
RANDOM
Random magazine.
Possible values: Yes / No.
Default value: No.
Associated variable: (V.)TM.MZRANDOM[mz]
Parameter included in the MAGAZINE // STORAGE table.
This parameter indicates whether the tools must always occupy the same position (non-
random) or they may occupy any position (random).
I n s ta ll a t io n ma n u a l.