Variables - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .

14.16.2 Variables.

The following variables may be accessed from (PRG) the part-program and from the
MDI/MDA mode, PLC and (INT) from an external application. For each variable, the table
indicates whether the access is reading (R) or writing (W).
Variable.
(V.)[ch].MPG.CUTTINGON
Subroutine associated with the command #CUTTING ON.
Units: Text.
(V.)[ch].MPG.CUTTINGON
Subroutine associated with the command #CUTTING OFF.
Units: Text.
Syntax.
·ch· Channel number.
[2].MPG.CUTTINGON
[2].MPG.CUTTINGOFF
PRG
-
-
Channel ·2·.
Channel ·2·.
PLC INT
- R
14.
- R
CNC 8060
CNC 8065
(R : 1709)
EF
·637·