Sequence To Define The Values In The File - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .
12.1.4

Sequence to define the values in the file.

Assuming a trihedron on the following axes.
VMOVAXIS1=X VMOVAXIS2=Y VMOVAXIS3=Z.
1 The first row corresponds to the point "X(P1), Y(P1), Z(P1)". This point corresponds to
the initial point of the volume to be compensated (parameters INIPOSAX1, INIPOSAX2
and INIPOSAX3).
Y
2 The second row corresponds to the point "X(P2), Y(P1), Z(P1)", the third to point "X(P3),
Y(P1), Z(P1)", and so on until completing all the points of X (parameter NPOINTSAX1).
The distance between the points on the X axis is defined in the parameter INCREAX1.
Y
3 Repeat the same operation to define all the points on the X axis, from the point Y(P2)
to the last point on the Y axis (parameter NPOINTSAX2). The distance between points
on the Y axis is defined in the parameter INCREAX2.
Y
Y(Pn)
NPOINTAX2
Y(P2)
1
Z
XYZ(P1)
X (INIPOSAX1)
Y (INIPOSAX2)
Z (INIPOSAX3)
2
Z
X(Pn)
NPOINTAX1
X(P4)
X(P3)
X(P2)
XYZ(P1)
3
Z
X(Pn)
NPOINTAX1
X(P4)
X(P3)
X(P2)
XYZ(P1)
X(P1) Y(P1) Z(P1)
X
X(P2) Y(P1) Z(P1)
···
X(Pn) Y(P1) Z(P1)
X
X(P1) Y(P2) Z(P1)
X(P2) Y(P2) Z(P1)
···
X(Pn) Y(P2) Z(P1)
···
X(P1) Y(Pn) Z(P1)
X
X(P2) Y(Pn) Z(P1)
···
X(Pn) Y(Pn) Z(P1)
12.
CNC 8060
CNC 8065
(R : 1709)
EF
·591·