2.5.9
2.
CNC 8060
CNC 8065
(R
: 1709)
EF
·164·
Module configuration (rotary axes and spindle).
MODCOMP
Module compensation.
Parameter valid for rotary axes and spindles.
Parameter valid for analog drive, Sercos and simulated.
Possible values: Yes / No.
Default value: No (without compensation).
Associated variable: (V.)[ch].MPA.MODCOMP.xn
The CNC takes this parameter into consideration only when AXISMODE = Module.
The module compensation must be activated when the axis resolution is not exact. Range
parameters MODNROT and MODERR set the compensation to be applied to obtain the
exact reading. The CNC applies module compensation throughout the entire revolution.
I n s ta ll a t io n ma n u a l.