Variables Related To Tool Magazine Management - Fagor CNC 8060 Installation Manual

7.4
7.
CNC 8060
CNC 8065
(R : 1709)
EF
·460·

Variables related to tool magazine management.

The variables associated with the magazine that are involved in the tool magazine
management are the following. There is one group of variables for each channel. Replace
the [ch] character with the channel number, maintaining the brackets.
V.[ch].TM.MZMODE
Operating mode of the tool magazine manager.
With a ·0· value
With a ·1· value
With a ·2· value
V.[ch].TM.MZSTATUS
Tool manager status.
With a ·0· value
With a ·1· value
With a ·2· value
With a ·4· value
V.[ch].TM.MZRUN
Tool manager running.
With a ·0· value
With a ·1· value
V.[ch].TM.MZWAIT
Tool manager executing a maneuver. It indicates whether to wait or not for the maneuver
to end.
With a ·0· value
With a ·1· value
There is no need to program it in the subroutine associated with M06. The subroutine itself
waits for the manager's maneuvers to finish. This way, block preparation is not interrupted.
Normal mode (by default and after reset).
Magazine loading mode.
Magazine unloading mode.
Normal.
An error has occurred.
An error has occurred; but it will wait for the current maneuver
to be completed.
Emergency.
There is no sequence in execution.
There is a sequence in execution.
No need to wait.
It has to wait.
I n s ta ll a t io n ma n u a l.