Generic Oem Parameters - Fagor CNC 8060 Installation Manual

2.12.2
2.
CNC 8060
CNC 8065
(R : 1709)
EF
·316·

Generic OEM parameters.

The values of the table may be modified at any time. The new values are assumed
immediately without having to validate the parameters. This means that the values and
permissions of the table may be modified while executing a program.
The simulation environment has a copy of this table. On CNC power-up, the values of the
parameters of the real table are copied into the simulation table and from there on, they
become different in the writing of the variables of both tables.
In the simulation table, only the parameter values may be modified, not the rest of the
permissions. The values of the simulation table can only be read or modified through their
variable.
MTBPAR
OEM-parameter table.
This table offers 1000 generic parameters that the OEM can use as machine parameters.
The table has the following machine parameters.
MTBPAR
SIZE Number of OEM parameters.
DATA List of OEM parameters.
SIZE
Number of OEM parameters.
Possible values: From 0 to 1000.
Default value: 0.
Associated variable: (V.)MTB.SIZE
This parameter sets the number of OEM parameters that will be used.
DATA
List of OEM parameters.
This parameter shows the table of OEM parameters. The following fields must be defined
for each parameter.
DATA
VALUE Value of the parameter.
MODE Mode for accessing the parameter from its variable.
INCHES The parameter is affected by the change of units.
COMMENT OEM parameter description.
VALUE
Parameter value.
Possible values: Within ±99999.9999.
Default value: 0.
If the parameter is affected by the change of units (INCHES field), the value is entered in
the table in the units selected by machine parameter INCHES.
Each parameter has its own variables for reading or modifying (if it has a write permission)
their value from the part-program, PLC or interface. The access to these parameters using
variables will be as follows.
(V.)MTB.P[i] Value of the OEM parameter [i].
(V.)MTB.PF[i] Value of the OEM parameter [i]. Value per 10000.
Mnemoni. Value.
P0 7
P8 12,5
I n s ta ll a t io n ma n u a l.
V.MTB.P[i] V.MTB.PF[i]
V.MTB.P[0] = 7 V.MTB.PF[0] = 70000
V.MTB.P[8] = 12,5 V.MTB.PF[8] = 125000