Machine Parameters For The Axes And Spindles - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .
2.5

Machine parameters for the axes and spindles.

The CNC only shows the parameters for the selected type of axis and drive. That's why it
displays some characters next to each parameter indicating the corresponding type of axis
and drive.
In the laser model, the parameters related to spindle speed (defined in rpm) define the power
(defined in watts).
2.5.1 Belonging to the channel.
AXISEXCH
Channel change permission.
Parameter valid for linear and rotary axes and spindles.
Parameter valid for analog drive, Sercos and simulated.
Possible values: No / Temporary / Maintained.
Default value: No.
Associated variable: (V.)[ch].MPA.AXISEXCH.xn
Initially, each channel has some axes and spindles assigned to it. The CNC can change
channel axes and spindles or just change the configuration of a channel by modifying the
position of its axes and spindles or eliminating some of them.
In order for the CNC to be able to change the channel axes and spindles, they must have
permission. Parameter AXISEXCH sets whether the axis or the spindle has permission to
change channels and if it does, whether the change is temporary or permanent; in other
words, whether the change is maintained after an M02, M30, a reset or after restarting the
CNC.
AXISEXCH.
No.
Temporary.
Maintained.
The original configuration (the one defined in the machine parameters) of a channel with axes
and spindles of the type "AXISEXCH = Maintained" may be restored either by validating the
machine parameters or by undoing the changes, for example using a part-program. It must
be borne in mind that validating the machine parameters restores the configuration of all the
channels.
Meaning.
• The CNC can modify the position of the axis or spindle in its channel or even
remove it from the channel.
• The CNC cannot change the axis or the spindle of the channel.
• The CNC does not maintain the changes when restarting the part-program,
after a reset or after restarting the CNC. The axis or spindle returns to its
original position, set by machine parameters.
• The CNC can modify the position of the axis or spindle in its channel or even
remove it from the channel.
• The CNC can change the axis or the spindle of the channel.
• The CNC does not maintain the changes when restarting the part-program,
after a reset or after restarting the CNC. The axis or spindle returns to its
channel and original position, set by machine parameters.
• The CNC can modify the position of the axis or spindle in its channel or even
remove it from the channel.
• The CNC can change the axis or the spindle of the channel.
• The CNC maintains the changes when restarting the part-program, after a
reset or after restarting the CNC. The axis or spindle stays in its new channel,
but it can change the position to let the original axes of the channel return.
2.
CNC 8060
CNC 8065
(R : 1709)
EF
·153·