Example Of How To Set The Handwheels And Jog Keys - Fagor CNC 8060 Installation Manual

2.7.5
2.
CNC 8060
CNC 8065
(R : 1709)
EF
·248·

Example of how to set the handwheels and jog keys.

Handwheel setting.
On a machine with X, Y, Z and A axes, we would like an individual handwheel for the X axis,
an individual handwheel for the Y and a general handwheel for the Z and A axes.
• Individual handwheel for the X axis.
Feedback input:
Disk graduated with 100 lines.
Pulses/ turn:
Resolutions (X):
• Individual handwheel for the Y axis.
Feedback input:
Disk graduated with 100 lines.
Pulses/ turn:
Resolutions (Y):
• General handwheel for the rest of the axes (Z, A).
Feedback input:
Disk graduated with 100 lines.
Pulses/ turn:
Resolutions (Z):
Resolutions (A):
Parameter setting:
Machine parameter.
NMPG
X axis handwheel (MANPG 1).
Machine parameter.
COUNTERTYPE
COUNTERID
MPGAXIS
MPGRESOL 1
MPGRESOL 10
MPGRESOL 100
Y axis handwheel (MANPG 2).
Machine parameter.
COUNTERTYPE
COUNTERID
MPGAXIS
MPGRESOL 1
MPGRESOL 10
MPGRESOL 100
keyboard (MPG1).
100
0.001, 0.01, 0.1
keyboard (MPG2).
200
0.001, 0.01, 0.1
Counter (X1).
100
0.001, 0.01, 0.1
0.01, 0.1, 1
Value. Meaning.
3 3-handwheel system.
Value. Meaning.
Keyboard. H a n d w h e e l c o n n e c t e d t o t h e
keyboard.
-1 MPG1 connector.
X Associated axis.
0.001 Resolution 0.001
0.01 Resolution 0.01
0.1 Resolution 0.1
Value. Meaning.
Keyboard. H a n d w h e e l c o n n e c t e d t o t h e
keyboard.
-2 MPG2 connector.
Y Associated axis.
0.0005 Resolution 0.001
0.005 Resolution 0.01
0.05 Resolution 0.1
I n s ta ll a t io n ma n u a l.