Compensating The Dispersion By The Co2 Laser Path - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .
2.3.31

Compensating the dispersion by the CO2 laser path.

LASERFOLLOW
Compensate the dispersion by the CO2 laser path.
This parameter shows the table to define the compensation. The goal of the compensation
is to keep the total laser path constant in order to prevent dispersion variations in the cutoff
point on the sheet.
SLAVE
For the compensation, a slave axis, which follows the main axes, is used. The dispersion
compensation is activated from the program using the instruction #FOLLOW or from the PLC
using the instruction FOLLOW.
LASERFOLLLOW
LASERFOLLOWAXIS
LASERFOLLOWOFFSET
LASERFOLLOW1
LASERFOLLOW2
LASERFOLLOW3
LASERFOLLOWAXEIS
Indicates the slave axis to which FOLLOW is applied.
Possible values: X, X1··X9, ·· , C, C1··C9.
Default value: 0 (no compensation).
Associated variable: (V.)MPG.LASERFOLLOW
Parameter included in the LASERFOLLOW table.
Name of the slave axis for compensation (axis on which the instruction #FOLLOW or the
PLC command FOLLOW acts). The variable V.A.FLWMASTER.xn of this axis will be the
main element of the synchronization.
The axis name is defined by 1 or 2 characters. The first character must be one of the letters
X - Y - Z - U - V - W - A - B - C. The second character is optional and will be a numerical
suffix between 1 and 9. This way, the name of the spindles may be within the range X,
X1...X9,...C, C1...C9. For example X, X1, Y3, Z9, W, W7, C...
LASERFOLLOWOFFSET
Source offset of the X Y Z axes regarding the slave axis.
Possible values: Within ±99999.9999 mm / Within ±3937.00787 inch.
Default value: 0.
Associated variable: (V.)MPG.LASERFOLLOWOFFSET
Parameter included in the LASERFOLLOW table.
This offset allows the minimization of the total laser path.
LASER
Y
X
Slave axis applied to which FOLLOW is applied.
Offset of the X Y Z axes with respect to the slave axis.
Indicates how the first of the X Y Z axes affect the slave axis.
Indicates how the second of the X Y Z axes affect the slave axis.
Indicates how the third of the X Y Z axes affect the slave axis.
2.
CNC 8060
CNC 8065
(R : 1709)
EF
·113·